TM 9-2330-213-14&P
2-11. TOWING INSTRUCTIONS.
WARNING
Before moving trailer, ensure that all loose equipment is properly stowed and that
nothing will drag on ground. If trailer is loaded, ensure that load is properly secured.
Failure to follow this warning may result in injury to personnel or damage to
equipment.
Perform all During (D) PMCS in Table 2-1 while operating the trailer.
a.
b. When towing the trailer, overall length of the unit must be kept in mind when passing other vehicles
and when turning.
Turning and backing operations will be affected because the towing vehicle and trailer are a hinged
c.
unit.
Always tow the trailer at safe speeds and note any driving irregularities.
d.
e. When parking for extended periods, set the handbrakes on both towing vehicle and trailer.
If the towing vehicle and trailer are parked on a hill, chock wheels.
f.
Refer to FM 21-305 for further information on proper driving practices.
g.
WARNING
All personnel must stand clear of towing vehicle and trailer during uncoupling
operation. Failure to follow this warning may result in serious injury or death.
If cargo trailer is equipped with an old-style, single-wheel castor assembly, USe
extreme caution to ensure that locking pin of handle has securely locked the
adjustable caster assembly in the lowered position. If locking pin is not fully
locked, adjustable caster assembly may collapse, resulting in serious injury.
a. Support adjustable caster assembly (2) and at the same time pull out release handle (1). Lower
adjustable caster assembly. Ensure that release handle is fully engaged.
TA505241
