TM 9-2330-213-14&P
Section Ill. OPERATOR MAINTENANCE
Page
Paragraph Title
Number
Handbrake Lever Adjustment (All Except M107A1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operational Air Leak Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel Replacement . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARNING
If trailer is not coupled to towing vehicle, ensure that wheols are securelychocked.
Failure to do so may cause trailer to roll, resulting in injury to porsonnel or damage
to equipment.
NOTE
q Handbrake lever (1) is property adjusted when additional force is required to move
handbrake lever beyond two-thirds distance of travel toward the applied position.
q Both
handbrake levers (1) preadjusted the same way. This procedure covers one
handbrake lever,
a. Release handbrake lever (1).
b. Turn adjustment knob (2) clockwise to tighten or counterclockwise to loosen.
c. Check adjustment, Repeat steps a and b as required.
a. Couple trailer to towing vehicie and connect all air hoses (para 2-10).
b. Start towing vehicle and watch vacuum gage (1) or air pressure gage (2) for normal reading. Refer to
towing vehicle technical manual for instructions.
TASOS248