TM 9-2330-213-14&P
4-33. SERVICE BRAKE ASSEMBLY MAINTENANCE (M103A1, M105A1, AND M107A1) (Con't).
e.
MINOR ADJUSTMENT
NOTE
Perform this adjustment at each wheel to compensate for normal brakeshoe lining
wear.
Raise axle (1) enough to allow wheel to spin freely. Support axle with suitable jackstand.
1.
2.
Adjust brakeshoes by turning two adjusting studs (32) on backing plate (3) until a slight drag is felt when
wheel is spun.
Back off adjustment until wheel spins freely.
3.
4.
Remove jackstand and lower axle (1).
FOLLOW-ON TASKS:
Bleed brakes, if axle hydraulic
4-47