TM 9-2330-213-14&P
4-34. SERVICE BRAKE ASSEMBLY MAINTENANCE (M103A3, M105A2, M105A2C, M107A2,
AND M107A2C) (Con't).
b. CLEANING AND INSPECTION
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake components unless area
has been properly cleaned, There may be asbestos dust on these components
whlch can be dangerous if you touch it or breathe it. Wear an approved filter mask
and gloves. Never use compressed air or a dry brush to clean brake components.
Dust may be removed uslng an lndustrial-type vacuum cleaner. Clean dust or mud
away from brake components with water and a wet, soft brush or cloth. Failure to
follow this warning may result in serious illness or death.
Dry cleaning solvent P-D-680 is toxic and flammable. Always wear protectlve
goggles and gloves, and use only In a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame or
excessive heat. The solvent's flash point is 100F-130F (38C-59C). If you
become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts eyes, immediately wash your eyes and get medical aid.
Clean all parts with dry cleaning solvent. Dry thoroughly.
1.
2.
inspect all removed components for damage. Replace any damaged parts.
TA505276
4-49