TM 9-2330-213-14&P
4-35. MASTER CYLINDER REPLACEMENT (ALL EXCEPT M105A2C).
This Task Covers:
Installation
b.
Removal
a.
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
General mechanic's tool kit
Rags (Item 11, Appendix E)
Drain pan
One gasket
Six lockwashers
REMOVAL
a.
NOTE
A suitable container should be used to catch any draining brake fluid. Ensure that all
spiiis are cleaned up.
1.
Remove hose (12) and reducer (11) from master cylinder (15).
Remove three nuts (13), Iockwashers (14), master cylinder (15), and airbrake chamber (1) from bracket
2.
(18). Discard Iockwashers.
Remove boot (16) from master cylinder (15).
3.
4.
Loosen clamp (9) and remove hose (10) from vent tube (8).
Remove vent tube (8), filler cap (7), baffle (6), and gasket (5) from master cylinder (15). Discard
5.
gasket.
If bracket (18) is damaged, remove three nuts (4), Iockwashers (3), screws (2), and bracket from
6.
crossmember (17). Discard Iockwashers.
TA505280
