TM 9-2330-213-14&P
4-43. AIRBRAKE CHAMBER REPLACEMENT.
This Task Covers:
a.
Removal
b. Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
General mechanic's tool kit
REMOVAL
a.
1.
Remove tube (2) and adapter (1) from airbrake chamber (7).
CAUTION
Master cylinder (3) must be supported when airbrake chamber (7) is removed.
Damage to hydraulic brake line may result if master cylinder is not supported,
2.
Remove three nuts (5), Iockwashers (4), and airbrake chamber (7) from master cylinder (3) and bracket
(6). Discard Iockwashers.
b.
Installation
1.
Position airbrake chamber (7) on bracket (6). Install airbrake chamber to bracket and master cylinder (3)
with three new Iockwashers (4) and nuts (5),
2.
Install adapter (1) and tube (2) on airbrake chamber (7),
TA505295
