TM 9-2330-213-14&P
4-57. SPRING SHACKLE REPLACEMENT (Con't).
c. INSTALLATION
NOTE
Right and left spring shackles (13) are installed the same way. This procedure
covers one spring shackle.
Position spring shackle (13) at spring hanger (2) and install pin (5) with groove alined for screw (14).
1.
Install screw, new Iockwasher (3), nut (4), and grease fitting (6).
Aline spring (10) with spring shackle (13) and install pin (9). Install two screws (7), new Iockwashers (1 2),
2.
nuts (11), and grease fitting (8) on shackle.
Raise floor jack and remove jackstand from rear crossmember (1).
3.
FOLLOW-ON TASKS:
q
TA505315
4-99