TM 9-2330-213-14&P
4-61. VENT MAINTENANCE.
This Task Covers:
Assembly
c.
a. Disassembly
b. Cleaning and Inspection
Initial Setup:
Tools/Test Equipment:
Materiais/Parts:
General mechanic's tool kit
Three cotter pins
q
q
a.
DISASSEMBLY
1.
Remove wingnut (2) and flatwasher (1) from bolt (12). Remove cotter pin (11), flatwasher (10), pin (9),
and bolt from vent (8). Discard cotter pin.
Remove cotter pin (16), flatwasher (15), pin (13), and disconnect hinge (3) from cover (14). Remove
2.
cover. Discard cotter pin.
Remove strainer (4) from
Remove cotter pin (5), flatwasher (6), pin (7), and hinge (3) from vent (8)
3.
q
vent. Discard cotter pin.
CLEANING AND inspection
b.
Clean all parts and inspect for damage.
1.
Replace any damaged parts.
2.
TA505323