ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9. ONE OR MORE, BUT NOT ALL RECEPTACLES WILL NOT WORK - CONTINUED
Continued
Step 3.
If receptacles still do not work, the wire leading from
receptacles to ground wire needs replacement. Notify
Direct Support Maintenance.
NOTE
Perform the following steps to all receptacles which do not work.
Step 4.
Using multimeter set to read continuity, put red probe in one
contact and black probe in the other.
If multimeter shows continuity, replace receptacle
Using multimeter set to read continuity, put red probe on one
Step 5.
end of wire for receptacle closest to rear and black probe
on other end of wire on the same side where it connects
to the closest working receptacle in that row.
a. If multimeter shows no continuity, wire needs
replacement. Notify Direct Support Maintenance.
b. If multimeter shows continuity, wire on other
side needs replacement. Notify Direct Support Maintenance.
AIR OVER HYDRAULIC BRAKE SYSTEM
10. BRAKES WILL NOT APPLY OR RELEASE
Check towing vehicle brake system to make sure it is operating correctly.
Step 1.
If brake system is not operating correctly, troubleshoot towing vehicle.
Check intervehicular air connectors to make sure they are hooked up
Step 2.
correctly to towing vehicle.
If intervehicular air connectors are not hooked up correctly,
hook them up correctly (page 2-19).
