HYDRAULIC TUBES AND FITTINGS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL - CONTINUED
Two clamps (3)
Using ball-peen hammer and 1/2-inch
11. Axle(1) and
hand cold chisel, bend back.
left tube (2)
Take off.
Left tube (2)
12. Axle(1) and
two clamps (3)
Connection (5)
Using 7/16-inch open-end box
13. Nut (4)
and 9/16-inch open-end wrenches,
unscrew and take off.
NOTE
If working on one-wheel cylinder option, go to step 34.
Using 3/4-inch box-end wrench, unscrew
Fitting (7) with
14. Left top wheel
gasket (8)
and take off.
cylinder (6)
Gasket (8)
Take off.
15. Fitting (7) and
connection (9)
Fitting (7) with
Take off.
16. Connection (9)
gasket (10)
Gasket (10)
Take off.
17. Fitting (7)
18. Left bottom wheel
Bolt (12) with
Using 11/16-inch box-end wrench,
gasket (13)
unscrew and take off.
cylinder (11)
Gasket (13)
Take off.
19. Bolt (12) and
connection (14)
Bolt (12) with
Take off.
20. Connection (14)
gasket (15)
Gasket (15)
Take off.
21. Bolt (12)
Take off.
Tube (17) with
22. Backing plate (16)
nuts (18)
Two connections (9)
a. Using 7/16-inch open-end box
23. Two nuts (18)
and (14)
and 9/16-inch open-end wrenches,
unscrew and take off.
b. Repeat steps 7 thru 23a for right side.
4-110