TM 9-2330-227-14&P
AIR RESERVOIR - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL - CONTINUED
Using 5/8-inch open-end box wrench and
Two nuts (2)
4. Two adapters (1)
9/16-inch open-end wrench, unscrew and
with air line (3)
take off.
Air reservoir (5)
Slide out.
5. Four brackets (4)
Four screws (7),
Using 9/16-inch socket, ratchet handle
6. Four brackets (4)
Iockwashers (8),
with 1/2-inch drive, and 9/16-inch
and frame
member (6)
and nuts (9)
box-end wrench, unscrew and take off.
Four brackets (4)
Take off.
7. Frame member (6)
INSTALLATION
Four brackets (4)
Put in place.
8.
Four Iockwashers
Screw in, and tighten using 9/16-inch
9. Four brackets (4)
(8), screws (7),
and frame
socket, ratchet handle with 1/2-inch
and nuts (9)
drive, and 9/16-inch box-end wrench.
member (6)
Air reservoir (5)
Slide in place.
10. Four brackets (4)
Two nuts (2)
Screw in, and tighten using 5/8-inch
11. Two adapters (1)
with air line (3)
open-end box wrench and 9/16-inch
open-end wrench.
Two Iockwashers
Screw in, and tighten using 9/16-inch
12.
(10), screws (11),
socket, ratchet handle with 1/2-inch
and nuts (12)
drive, and 9/16-inch box-end wrench.
Adapter (13)
a. Wrap threads clockwise two
13. Air reservoir (5)
turns with teflon tape.
b. Screw in, and tighten using 11/16-inch
box-end wrench.
Nut (14)
Screw in, and tighten using 7/8-inch
14. Adapter (13)
open-end box wrench and 11/16-inch
open-end wrench.
6-132
