TM 9-2330-227-14&P
LANDING GEAR SHOE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
Crank (3)
Turn clockwise until leg (9) clears
5. Shaft (2)
shoe (4).
6. Leg (9)
Shoe (4)
Slide out.
INSTALLATION
7.
Shoe (4)
Put in place under leg (9).
8. Shaft (2)
Crank (3)
Turn counterclockwise until leg (9)
and shoe (4) holes line up.
Pin (5)
9. Shoe (4) and
Using ball-peen hammer and 5/8-inch
leg (9)
brass driftpin, tap in place.
10. Shoe (4) and
Screw (6),
Screw in, and tighten using 3/4-inch
pin (5)
nut (7), and two
socket, ratchet handle with 1/2-inch
washers (8)
drive, and 3/4-inch box-end wrench.
Crank (3)
11. Shaft (2)
Turn counterclockwise until weight is
taken off trestle.
12.
Semitrailer (1)
Remove trestle.
4-153
