TM 9-2330-227-14&P
SPLASH WARDS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
NOTE
Both splash guards are removed and installed the same way. This task is for one;
repeat for the other.
REMOVAL
Using 7/16-inch socket, ratchet handle
Four screws (4),
1. Bracket(1),
with 1/2-inch drive, and 7/16-inch box-
Iockwashers (5),
splash guard (2),
end wrench, unscrew and take off.
and nuts (6)
and plate (3)
Take off, and separate.
Splash guard (2)
2. Bracket (1)
and plate (3)
Using slip-joint pliers, straighten and
Two cotter pins (7)
take out.
Slide in, and take out.
Bracket (1)
Bracket (1)
Slide into place.
Put in, and using slip-joint pliers, bend
Two cotter pins (7)
back.
Splash guard (2)
a. Put together.
and plate (3)
b. Put in place.
Four lock-
Screw in, and tighten using 7/16-inch
8. Bracket (1),
washers (5),
socket, ratchet handle with 1/2-inch
splash guard (2),
drive and 7/16-inch box-end wrench.
screws (4), and
and plate (3)
nuts (6)
