TM 9-2330-227-14&P
DATA PLATES
This task covers:
INITIAL SETUP
Personnel Required
Tools
One
Screwdriver, cross-tip, number two
ACTION
REMARKS
ITEM
LOCATION
NOTE
All data plates are removed and installed the same way. The number of screws will
vary. This task is for one; repeat for the others.
REMOVAL
Using number two cross-tip screwdriver,
1. Data plate (1)
Six screws (3)
unscrew and take off.
and van body (2)
Take off.
Data plate (1)
2. Van body (2)
INSTALLATION
Put in place.
Data plate (1)
3.
Screw in, and tighten using number two
Six screws (3)
Data plate (1)
4.
cross-tip screwdriver.
and van body (2)
4-186