TM 9-2330-227-14&P
WIRE HARNESS, 110-VOLT, BRANCH CIRCUIT BREAKERS-TO-LAMPS AND SWITCHES - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
12 screws (3)
1. 12 clamps (1)
Using two 7/16-inch sockets and two
and nuts (4)
ratchet handles with 3/8-inch drives,
at roof cross-
members (2)
unscrew and take off.
12 clamps (1)
Using 3/16-inch flat-tip screwdriver,
2. Harness (5)
spread and take off.
12 screws (7)
Using 7/16-inch open-end wrench and
3. 12 clamps (6)
and nuts (8)
3/16-inch flat-tip screwdriver, unscrew
at right side
of ceiling
and take off.
12 clamps (6)
Using 3/16-inch flat-tip screwdriver,
4. Harness (5)
spread and take off.
Pull out of grommet (9) and up toward roof.
Harness (5)
5. Grommet (9) at
side switch
location (10)
5-3
