TM 9-2330-227-14&P
WALL RECEPTACLE CABLES - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
NOTE
Steps 37 thru 40 connect left side cables to circuit breaker box, and steps 41 thru 44
connect right side cables to circuit breaker box.
Place in position.
Cable (2) with metal
37. Terminal (1)
band 38D
Tighten using 3/16-inch flat-tip
Screw (3)
Cable (2)
screwdriver.
Place in position.
Cable (5) with
Terminal block (4)
metal band 38S
Tighten using 3/16-inch flat-tip
Screw (6)
Cable (5)
screwdriver.
Place in position.
Terminal (7)
Cable (8) with metal
band 38C
Tighten using 3/16-inch flat-tip
Cable (8)
Screw (9)
screwdriver.
Cable (10) with
Place in position.
Terminal block (4)
metal band 38R
Tighten using 3/16-inch flat-tip
Screw (11)
Cable (10)
screwdriver.
Cover (13)
Place in position.
Circuit breaker
box (12)
Four screws (14)
Screw in, and tighten using 3/16-inch
Cover (13)
flat-tip screwdriver.
Cover sections (16)
Base (15)
Using ball-peen hammer, tap in the full
length of wall receptacle base.
