TM 9-2330-227-14&P
RADIUS RODS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
ADJUSTMENT
Measure, and make note of the distance
Screw (4) and
1. N o n - a d j u s t a b l e
radius rod (1),
screw (5)
between center of screw (4) and center
radius rod bracket
of screw (5).
(2), and spring
bracket (3)
Nuts (7)
Using two 3/4-inch open-end wrenches,
2. Screws (6)
loosen.
Measure distance between center of screw
Screw (11) and
3. Adjustable radius
rod (8), radius
(11) and center of screw (12).
screw (12)
rod bracket (9),
If measurement is the same, go to
step 5. If not, continue with
and spring
bracket (10)
step 4.
Adjustable
Using 1 1/2-inch open-end wrench, turn
4.
radius rod (8)
body either right or left to lengthen or
shorten rod to same measurement as noted
in step 1.
Nuts (7)
Using two 3/4-inch open-end wrenches,
5. Screws (6)
tighten.
5-74
