TM 9-2330-227-14&P
SPRING BRACKETS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
Position in brackets, and line up holes.
18. Spring brackets
(1) and (2)
and four washers (10)
Two shafts (7)
Using 1/2-inch drive-pin punch and
19.
ball-peen hammer, tap in.
Make sure Iockscrew holes line up.
Tighten using 3/8-inch star socket and
Four
20. Two shafts (7)
ratchet handle with 3/8-inch drive.
Iockscrews (8)
Two washers (12)
a. Coat with grease, and place on each
21. Radius rod (11)
side of rod.
b. Lineup holes.
Position on frame.
Spring brackets
22. Semitrailer
See that radius rod with washers
(1) and (2)
frame (4)
is seated in spring bracket with
holes lined up.
a. Put longer screws in correct location.
16 screws (5)
23. Spring brackets
b. Screw together, and tighten using
and nuts (6)
(1) and (2)
3/4-inch socket, ratchet handle with
1/2-inch drive, and 3/4-inch open-end
wrench.