SIDE DOOR AND RIGHT REAR DOOR - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
REPAIR - CONTINUED
Position on door.
Center case (2)
43. Door (1)
and spacer (3)
Four screws (4)
Screw in, and tighten using number two
cross-tip screwdriver.
and spacer (3)
Position on door (l).
Handle (5)
Roll pin (6)
Using 1/16-inch drive-pin punch and
43. Handle (5)
ball-peen hammer, tap in.
Guide (7)
Position on door(l).
Four screws (8)
Screw in, and tighten using number two
cross-tip screwdriver.
Wedge bolt (10)
Put on.
Screw assembly (11)
Screw in, and tighten using 3/16-inch
39. Strap (9) and
flat-tip screwdriver.
wedge bolt (10)
Strap (9) and
Slide wedge bolt (10) into guide (7).
wedge bolt (10)
Strap (9) and spring
Put on.
washer (13)
Push through, and using pliers, spread
Cotter pin (14)
legs.
Lower strap
Repeat steps 47 thru 53.
assembly (15)