TM 9-2330-227-14&P
LEFT REAR DOOR - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REPAIR - CONTINUED
47 rivets (2)
a.
Using 1/8-inch drive-pin punch and
14. Interior
panel (1)
ball-peen hammer, drive punch through
center of rivet head with a solid blow
of hammer.
Rivet heads will either fall off or
can be lifted off with screwdriver.
b.
Using 3/16-inch drive-pin punch and
ball-peen hammer, drive out remaining
part of rivet (2).
Interior panel (1)
Take off.
15. Door (3)
16.
Weatherstrip (4)
a. Take off.
b. Using wire brush, clean old adhesive
from door (3).
17. Retainer (5)
24 screws (6)
Using number two cross-tip screwdriver,
unscrew and take off.
Retainer (5) and
a. Take off.
18. Door (3)
weatherstrip (7)
b. Using wire brush, clean old adhesive
from door (3).
