TM 9-2330-231-14&P
OPERATION IN MUD
Thoroughly clean and lubricate all parts contaminated by mud as soon as possible after operating in mud. Pack wheel
bearings if necessary.
FORDING
1. Check bottom surface of stream or river. If bottom surface is too soft, do not ford.
2. After fording, apply the brakes a few times to help dry out the brake linings. Be sure brakes are operating properly
before driving at normal speeds.
3. Lubricate all unpainted surfaces with lubricating oil.
4. Lubricate trailer in accordance with lubrication chart. See page 4-2.
5. Refer to TM 9-236 for deepwater fording information.
Change 1 2-15/(2-16 blank)
