TM 9-2330-231-14&P
WHEEL AND TIRE
This Task Covers:
a. Removal (page 3-5)
b. Installation (page 3-6)
Initial Setup
Tools
Equipment Condition
Handle, 3/4-inch square drive
Handbrake applied.
Hydraulic jack
Socket, 1 1/2-by 3/4-inch square
drive
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Hub studs and wheel nuts are marked Ron right wheel and L on left wheel. Nuts
must be turned in opposite direction to normal forward rotation of wheel to be
loosened or removed.
1
Hub studs (1)
Six nuts (2)
Using 1 1/2-inch socket, loosen.
Do not remove at this time.
2
Axle (3)
Jack (4)
Raise wheel and tire (5) until it clears
ground.
3.
Hub studs (1)
Six nuts (2)
Using 1 1/2-inch socket, remove.
4.
Hub (6)
Wheel and tire (5)
Remove.
TA223856
3-5
