TM 9-2330-231-14&P
HYDRAULIC BRAKE LINES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CHASSIS BRAKE TUBE REMOVAL
10.
Master
Nut (2)
Using 5/8- and 7/16-inch wrenches,
cylinder (1)
remove.
11.
Fitting (3) and
Using 5/8-inch wrench, remove.
gasket (4)
Discard gas ket (4).
12.
Brake line (5)
Three screws (6),
Using cross-tip screwdriver, remove.
three washers (7),
and three clamps (8)
13.
Union (9)
Two nuts (10)
Using two 7/16-inch wrenches, remove.
NOTE
After union is removed, brake line will be in two pieces.
14.
Left frame
Brake line (5)
Remove.
rail (11)
CYLINDER-TO-CYLINDER BRAKE TUBE REMOVAL
15.
Fitting (12)
Bolt (13), washers
Using 3/4-inch wrench, remove.
(14 and 15), and
Discard washers (14 and 15).
connector (16)
16.
Brake lines
Nuts (19)
Using 7/16-inch wrench, remove.
(17 and 18)
17.
Fitting (12)
Bolt (20)
Using 7/16-inch wrench, remove,
18.
Backing plate (21)
Two bolts (22), tWO
Using 3/4-inch wrench, remove.
washers (23 and 24),
Discard washers (23 and 24).
and two connectors (25)
NOTE
Repeat steps 15 thru 18 for opposite wheel.
4-62