TM 9-2330-231-14&P
HYDRAULIC BRAKE LINES AND FITTINGS
This task covers:
e. Cylinder-to-cylinder brake tube installation
c. Chassis brake tube removal
d. Cylinder-to-cylinder brake tube
INITIAL SETUP
TooIs Materials/Parts
Handle, reversible, 3/8-inch
Gaskets, copper, 1 1/16-inch OD
square drive
Gaskets, copper, 13/16-inch OD
Screwdriver, cross-tip
Gasket, inlet, copper
Socket, 7/16- by 3/8-inch
square drive
Equipment Condition
Wrench, open-end, 7/16-inch
(two each)
Wrench, open-end, 5/8-inch
Wrench, box-end, 3/4-inch
Wrench, open-end, 15/16-inch
ACTION
LOCATION
ITEM
REMARKS
FLEX HOSE REMOVAL
1.
Brake line (1)
Nut (2)
Using 7/16-inch wrench, remove.
2.
Bracket (3)
Nut (4)
Using 15/16- and 5/8-inch wrenches,
remove.
3.
T-fitting (5)
Nut (6)
Using 5/8-inch wrench, remove.
4.
Bracket to
Flex hose (7)
Remove.
T-fitting
4-60