TM 9-2330-231-14&P
PLASTIC AIRBRAKE LINE REPLACEMENT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
RELAY VALVE TO AIR CHAMBER
32.
Relay valve (1)
Nut (3)
Using 5/8-inch wrench, remove.
to air line (2)
33.
Air chamber (4)
Air line (2) and
Using 5/8-inch wrench, remove.
nut (5)
NOTE
To make a new air line, see page 4-85.
34.
Air chamber (4)
Air line (2) and
Using 5/8-inch wrench, install.
nut (5)
35.
Relay valve (1) to
Nut (3)
Using 5/8-inch wrench, install.
air line (2)
SERVICE TEE TO REAR SHUT OFF
36.
Tee (6) to air
Nut (8)
Using 5/8-inch wrench, remove.
line (7)
37.
Rear shutoff (9)
Nut (10)
Using 5/8-inch wrench, remove.
to air line (7)
36.
Air line (7) to
Wire tie (12)
Using pliers, cut off.
main harness (11)
Discard wire tie (12).
39.
Five clamps (13)
Five screws (14)
Using a cross-tip screwdriver, remove.
40.
Left frame
Air line (7)
Remove.
rail (15)
41.
Air line (7)
Five clamps (13)
Remove.
NOTE
To make a new line, see page 4-85.
42.
Air line (7)
Five clamps (13)
install.
43.
Left frame
Air line (7)
Place in position.
rail (15)
4-82
