TM 9-2330-231-14&P
PLASTIC AIRBRAKE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
FABRICATION
NOTE
This is a typical procedure for all air lines if the trailer is equipped with plastic lines.
1.
New air line (1)
Using razor blade, cut to same length as
old air line (2).
2.
New air line (1)
Nut (3)
Place on new air line (1) approximately
3.
Compression
fitting (4)
4.
Insert (5)
5.
Compression
fitting (4)
NOTE
Repeat steps 3 thru 6 for opposite end.
TASK ENDS HERE
TA223906
4-86