TM-9-2330-231-14&P
PLASTIC AIRBRAKE LINE REPLACEMENT
This task covers:
a.
Service elbow to air filter
d.
Emergency tee to relay valve
b. Service tee to relay valve
e.
Relay valve to air reservoir (page 4-81)
f.
Relay valve to air chamber (page 4-82)
c. Emergency elbow to air filter
g.
Service tee to rear shutoff (page 4-82)
h.
Emergency tee to rear shutoff (page 4-64)
INITIAL SETUP
Tools
Materials/Parts
Wrench, open-end, 5/8-inch
New wire ties (as required)
Wrench, open-end, 1 1/16-inch
Screwdriver, cross-tip
Applicable Configurations
Models with plastic air lines
ACTION
LOCATION
ITEM
REMARKS
SERVICE ELBOW TO AIR FILTER
1.
Service elbow (1)
Nut (3)
Using 5/8-inch wrench, disconnect.
to air line (2)
2.
Air filter (4) to
Nut (5)
Using 5/8-inch wrench, disconnect.
air line (2)
3.
Two clamps (6)
Two screws (7)
Using cross-tip screwdriver, remove.
4.
Left drawbar
Air line(2)
Remove.
leg (8)
5.
Air line (2)
Two clamps (6)
Remove.
NOTE
To make a new air line, see page 4-85.
6.
Air line (2)
Two clamps (6)
Install.
7.
Left drawbar
Air line(2)
Place in position.
leg (8)
8.
Two clamps (6)
Two screws (7)
Using cross-tip screwdriver, install.
4-78
