TM 9-2330-231-14&P
HUB AND BRAKEDRUM MAINTENANCE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WHEEL BEARING INSTALLATION
NOTE
When tapping bearing cup into hub make sure you work your way around circumference of
bearing cup. Keep bearing cup level during installation.
16. Hub (1)
Bearing cup (2)
a.
Position cup in hub lying on flat,
hard surface.
Large diameter of cup taper
should be face out.
Using hammer and drift, tap cup
(2) in until it is fully seated.
17. Spindle (3)
Wiper (4)
Position on spindle and gently tap
until fully seated.
TA223919
4-106
