TM 9-2330-231-14&P
LUNETTE
This Task Covers:
INITIAL SETUP
Tools
Materials/Parts
Pliers, diagonal cutting
Cotter pin
Wrench, open-end, 1 12-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Lunette (1)
Cotter pin (2)
Using pliers, remove.
Discard cotter pin (2).
2.
Nut (3) and flat
Using 1 1/2-inch wrench, remove.
washer (4)
3. Drawbar (5)
Lunette (1)
Remove.
INSTALLATION
NOTE
Lunette maybe positioned in either of two positions by rotating it 180 degrees in the drawbar.
Determine height need before installing.
4. Drawbar (5)
Lunette (1)
Place in position.
5. Lunette (1)
Nut (3) and fiat
Using 1 1/2-inch wrench, install.
washer (4)
6.
New cotter pin (2)
Using pliers, install.
4-110