TM 9-2330-231-14&P
SPRING ASSEMBLY- CONTINUED
ACTION
LOCATION
ITEM
REMARKS
SPRING REMOVAL- CONTINUED
3. Two U-bolts (1)
Four nuts (2)
Using 1 1/8-inch socket, remove.
4. Axle (3)
Two U-bolts (1)
Remove.
5. Spring (4)
Plate (5)
Pull down and swing away.
Plate (5) is attached to shock
absorber.
6. Axle (3)
Jack (6)
Position under center of spring (4).
Jack (6) will hold weight of
spring (4).
7. Two hangers (7)
Two nuts (8)
Using 15/16-inch socket and 15/16-
inch wrench, remove.
8.
Two screws (9)
Drive from hangers (7) using plastic
mallet.
9. Chassis
Spring (4)
Using jack (6), lower and remove.
TA223928
4-116
