TM 9-2330-231-14&P
LANDING GEAR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Chassis (1)
Jack stands (2)
Support chassis.
2. Frame support (3)
Nut (4), lockwasher
Using 7/8-inch socket and I-inch
(5), and bolt (6)
wrench, remove.
3. Frame (7)
Landing gear (8)
Remove.
INSTALLATION
4. Frame support (3)
Landing gear (8)
Place in position.
5. Frame support (3)
Nut (4), lockwasher
Using 7/8-inch socket and I-inch
(5), and bolt (6)
wrench, install.
6. Chassis (1)
Jack stands (2)
Remove.
DISASSEMBLY
7. Frame support (3)
Four bolts (9) and
Using 3/4-inch socket, remove.
8.
Landing leg (11)
Remove.
9. Handcrank (12)
Nut (13) and
Using 7/16-inch socket and 7/16-inch
bolt (14)
wrench, remove.
10. Landing leg (11)
Handcrank (12)
Remove.
11. Axle (15)
Two roll pins (16)
Using hammer and punch, remove.
Discard roll pins (16).
TA223924
4-112