TM 9-2330-235-14&P
4-14.
INTERVEHICULAR CABLE REPLACEMENT (M514).
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Marker tags (Item 14, Appendix E)
Trailer parked on level surface with handbrakes
Eight lockwashers
applied (para 2-2).
Intervehicular cable disconnected from towing vehicle (para 2-9).
Tools/Test Equipment:
General mechanic's tool kit
a.
REMOVAL
1. Remove four screws (12), lockwashers (11), and cover (13). Discard lockwashers.
NOTE
Tag wires before disconnecting.
2.
Disconnect chassis wiring harness (14) from intervehicular cable (7).
3.
Remove two screws (3), lockwashers (2), and clip (1). Discard lockwashers.
4.
Remove screw (9), lockwashers (10), and strap (8). Discard lockwashers.
5.
Remove screw (6), lockwashers (5), and clip (4). Remove intervehicular cable (7) ground terminal from clip
assembly (17). Remove intervehicular cable. Discard lockwashers.
6.
Inspect clip assembly (17) for damage or corrosion. If clip assembly is damaged or corrosion cannot be removed,
remove two screws (15), lockwashers (16), and clip assembly. Discard lockwashers.
b.
INSTALLATION
1.
If removed, install clip assembly (17) with two new lockwashers (16) and screws (15).
2.
Position intervehicular cable (7) for installation. Install intervehicular cable ground terminal to clip assembly (17).
3.
Install clip (4) with new lockwashers (5) and screw (6).
4.
Install strap (8) with new lockwashers (10) and screw (9).
5.
Install clip (1) with two new lockwashers (2) and screws (3).
6.
Connect chassis wiring harness (14) to intervehicular cable (7).
7.
Install cover (13) with four new lockwashers (11) and screws (12).
4-22
