TM 9-2330-235-14&P
4-15.
INTERVEHICULAR CABLE REPLACEMENT (M390).
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Trailer parked on level surface with handbrakes
Marker tags (Item 14, Appendix E)
Two lockwashers
applied (para 2-2).
Intervehicular cable disconnected from towing vehicle (para 2-9).
Tools/Test Equipment:
General mechanic's tool kit
a.
REMOVAL
NOTE
Tag wires before disconnecting.
1.
Disconnect chassis wiring harness (7) from intervehicular cable (1).
2.
Remove spring (6).
3.
Remove nut (5), lockwashers (4), screw (2), and clamp (3). Discard lockwashers.
4.
Remove screw (11), lockwashers (12), and clamp (13). Remove intervehicular cable (1) ground terminal from
spring clip (10). Remove intervehicular cable. Discard lockwashers.
5. Inspect spring clip (10) for damage or corrosion. If spring clip is damaged or corrosion cannot be removed,
remove three screws (8), lockwashers (9), and spring clip. Discard lockwashers.
b.
INSTALLATION
1.
If removed, install spring clip (10) with three new lockwashers (9) and screws (8).
2.
Position intervehicular cable (1) and install clamp (13) with new lockwashers (12) and screw (11).
3.
Install clamp (3) with screw (2), new lockwashers (4), and nut (5).
4.
Install spring (6).
5.
Install intervehicular cable (1) ground terminal to spring clip (10).
6.
Connect chassis wiring harness (7) to intervehicular cable (1).
4-24
