TM 9-2330-235-14&P
4-61.
LEFT FENDER AND TOOLBOX ASSEMBLY MAINTENANCE (M514).
This task covers:
a. Removal
c. Cleaning
e.
Installation
b. Disassembly
d. Assembly
INITIAL SETUP:
Equipment Conditions:
Materials/Parts:
Trailer parked on level surface with
Adhesive (Item 1, Appendix E)
handbrakes applied (para 2-2).
Rags (Item 12, Appendix E)
Left fender toolbox empty.
Dry cleaning solvent (Item 13, Appendix E)
Tools/Test Equipment:
Two gaskets
General mechanic's tool kit
Two seals
Common no. 1 shop set
Four rivets
Hand riveter, blind
Six lockwashers
Safety goggles
a.
REMOVAL
Remove six nuts (7), lockwashers (6), screws
(5), and fender and toolbox (1) from frame.
Discard lockwashers.
b.
DISASSEMBLY
1.
Release two catches (9) and remove lid (2) from
fender and toolbox (1).
2.
Remove two gaskets (3) and two seals (4) from
lid (2) opening. Discard gaskets and seals.
WARNING
When performing steps 3 and 4,
safety goggles must be worn to
prevent eye injury.
3.
Cut heads off two rivets (10) securing each catch
(9) to fender and toolbox (1).
4.
Drive rivet bodies out of fender and toolbox (1).
Remove two catches (9) and spacers (8) from
fender and toolbox (1). Discard rivets.
TA704359
4-155
