TM 9-2330-235-14&P
4-61.
LEFT FENDER AND TOOLBOX ASSEMBLY MAINTENANCE (M514) (Con't).
c.
CLEANING
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and
gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO
NOT breathe vapors. DO NOT use near open flame or excessive heat. The solvent's flash point is
100F-138F (38C-59C). If you become dizzy while using cleaning solvent, immediately get fresh
air and medical help. If solvent contacts eyes, immediately wash your eyes and get medical aid.
Use dry cleaning solvent to clean lid opening where gaskets are seals are to be installed. Thoroughly dry area.
d.
ASSEMBLY
1.
install spacer (8) and catch (9) on fender and
toolbox (1) with two new rivets (10). Repeat for
other catch.
2.
Use adhesive to install two new gaskets (3) and
two new seals (4). Allow adhesive to cure
according to instructions on tube.
3.
Position lid (2) on fender and toolbox (1) and
secure with two catches (9).
e.
INSTALLATION
Position fender and toolbox (1) on frame and
install six screws (5), new lockwashers (6), and
nuts (7).
TA704360
4-156
