TM 9-2330-246-14
4-29. MARKER CLEARANCE LIGHT MAINTENANCE (Con't).
REMOVAL
b.
1.
Remove two screws (1), retainer (2), and lens (3) from plate (6).
Iff lens (3) is damaged, remove two nuts (4) and lens (3) from studs on retainer (2).
2.
Remove four screws (9), Iockwashers (8), plate (6), and preformed felt (7) from semitrailer. Inspect preformed
3.
felt for damage. If damaged, remove and replace. Discard Iockwashers.
4.
Disconnect connector shell on marker clearance light wire from wiring harness.
c. INSTALLATION]
1.
Install preformed felt (7) on plate (6).
Connect connector shell on marker clearance light wire to wiring harness.
2.
Install preformed felt (7) and plate (6) on semitrailer using four screws (9) and new Iockwashers (8).
3.
NOTE
Marker clearance lights can have one of four types of lenses: red service, amber
service, red blackout, or amber blackout.
If removed, install lens (3) on studs of retainer (2) with two nuts (4).
4.
Install retainer (2) and lens (3) on plate (6) using two screws (1).
5.
FOLLOW-ON TASKS:
Connect intervehicular cable to semitrailer (para 2-10).
Check operation of light.
TA700183
4-54
