TM 9-2330-246-14
4-30. BLACKOUT STOPLIGHT MAINTENANCE (EARLY MODEL).
This Task Covers:
c. Installation
Lamp Replacement
a.
Removal
b.
Initial Setup:
Materials/Parts:
Equipment Conditions:
Intervehicular cable disconnected from semitrailer
One Iockwasher
Tools/Test Equipment
General mechanic's tool kit
LAMP REPLACEMENT
a.
Remove two screws (8) and door (7) from housing (3).
1.
Inspect gasket (6) for damage. If damaged, remove and discard.
2.
Push in on lamp (5), turn counterclockwise, and remove from lampholder (4).
3.
Install lamp (5) in Iampholder (4), push in, and turn clockwise.
4.
If removed, install new gasket (6) on door (7).
5.
Install door (7) on housing (3) using two screws (8).
6.
Disconnect wiring harness connector from housing (3).
1.
Remove screw (1), Iockwasher (2), and blackout stoplight from rear crossmember of chassis frame. Discard
2.
Iockwasher.
TA700184
4-55
