TM 9-2330-246-14
4-38. INTERCONNECTING CABLE ASSEMBLY REPLACEMENT
This Task Covers:
a.
Removal
b . Installation
initial Setup:
Equipment Conditions:
Materials/Parts:
Intervehicular cable disconnected from semitrailer
Marker tags (Item 24, Appendix E)
Two Iockwashers
Tools/Test Equipment
General mechanic's tool kit
1.
Tag and disconnect interconnecting cable (2) from main wiring harness (1).
2.
Disconnect Interconnecting cable (2) from receptacle (3).
NOTE
Clamp mounting hardware may vary from what is Illustrated.
Remove nut (4), Iockwasher (5), and screw (7) from each clamp (6). Spread open and remove two clamps from
3.
Interconnecting cable (2). Discard Iockwashers.
4.
Pull Interconnecting cable (2) through grommets (8) and remove.
If damaged, remove two grommets (8) from frame. Discard grommets.
5.
TA700200
4-76
