TM 9-2330-246-14
4-39. DOLLY MAIN WIRING HARNESS AND BRANCHED WIRING HARNESS
REPLACEMENT (Con't).
INSTALLATION
b.
1.
If removed, install new grommets (2 and 4) in dolly.
2.
Feed branched wiring harness (10) through grommets (4) and position for installation.
3.
Secure branched wiring harness (10) to dolly using two screws (11), clamp (12), and nuts (5).
4.
Connect branched wiring harness connectors (6) to taillight connectors (3). Remove tags.
5.
Secure ground terminal (7) to dolly using screw (9) and new Iockwasher (8).
Feed main wiring harness (15) through grommets (2).
6.
7.
Connect main wiring harness connectors (14) to branched wiring harness connectors (13). Remove tags.
8.
Connect main wiring harness connector (16) to cover assembly (1).
FOLLOW-ON TASKS:
Check operation of dolly lights.
4-79