TM 9-2330-247-14&P
S e c t i o n Il. SERVICE UPON RECEIPT
Page
Page
Preliminary Servicing and
Service Upon Receipt . . . . . . . . . . . . . . . . .
Adjustment of Equipment . . . . . . . . . . . . .
SERVICE UPON RECEIPT
ACTION
ITEM
REMARKS
LOCATION
Read and follow all instructions.
DD Form 1397
1.
Attached to
conspicuous part
of trailer
Metal strapping,
Remove.
2.
plywood, tapes,
seals, and wrappings
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable.
Always wear protective goggles and gloves, and use only In
a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near
open flame or excessive heat. The solvent's flash point is
100F-138F (38C-59C). If you become dizzy while
using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts eyes, Immediately wash
your eyes and get medical aid.
Remove rust preventive compound with dry cleaning
Coated exterior parts
3.
solvent (Item 12, Appendix E).
4.
Trailer
Inspect for damage received during shipping.
Equipment packing
a. Check against equipment to see if shipment
5.
slip
is complete.
b. Report all discrepancies in accordance with
instructions in DA Pam 738-750.
PRELIMINARY SERVICING AND ADJUSTMENT OF EQUIPMENT
Perform the operator/crew and organizational Preventive Maintenance Checks and Services (PMCS) contained in
Chapters 2 and 4.
Lubricate all points as shown in the Lubrication Chart (Chapter 3, Section l), regardless of interval.
Schedule the next PMCS on DD Form 314, Preventive Maintenance Schedule and Record.
Report all deficiencies on DA Form 2407 if the deficiencies appear to involve unsatisfactory design
Perform a break-in road test of 25 mi (40 km) at a maximum speed of 30 mi/h (48 km/h).
