TM 9-2330-251-14&P
4-25. AXLE REPLACEMENT (M416A1) (Con't).
INSTALLATION
b.
Place a suitable floor jack under midpoint of axle (4) and raise axle into position on spring assemblies (8) .
1.
2.
Secure 2 U-bolts (5) to plate assembly (13) with 4 new Iockwashers (12) and nuts (11).
Repeat step 2 for opposite side.
3.
Position tee (17) and tube assemblies (3) at axle (4). Secure tube assemblies to axle with 2 clamps (19)
4.
and screws (18).
Secure tee (17) to axle (4) with flatwasher (14), new Iockwasher (15), and nut (16).
5.
Install backing plate (6) on axle (4) with 4 screws (7), new Iockwashers (9), and nuts (10).
6.
Connect tube assembly (3) to wheel cylinder
7.
(2) and tighten inverted nut (1).
Repeat steps 6 and 7 for opposite side.
8.
Remove floor jack.
9.
FOLLOW-ON TASKS:
Install hubs and brakedrums (para 4-37).
q
q Bleed brakes (para 4-33).
TA503917
4-31
