TM 9-2330-251-14&P
4-27. HANDBRAKE CABLE ASSEMBLY REPLACEMENT (Con't).
4.
Remove 2 nuts (13) from adjusting rod (21). Remove adjusting rod and cable nut (1 2). Leave cable nut
on adjusting rod.
Remove equalizer (20) from handbrake cable assembly (19).
5.
Remove 2 nuts (15), Iockwashers (16), and bolts (18) securing strap (17) to crossmember (14). Remove
6.
strap. Discard Iockwashers.
Repeat step 6 for opposite side.
7.
NOTE
Steps 8 through 10 are for M416 only.
Remove cotter pin (23) and pin (25) and dis-
8.
connect handbrake cable assembly (19) from
pawl (24). Discard cotter pin.
Remove nut (28), Iockwasher (27), and screw
9.
(26) securing handbrake cable assembly (19)
to backing plate (29). Remove handbrake
cable assembly. Discard Iockwasher.
10.
Repeat steps 8 and 9 for opposite side.
TA503920
4-35