TM 9-2330-251-14&P
Section Vlll. BRAKE SYSTEM MAINTENANCE
Page
Paragraph Title
Number
Brakeshoe Adjustment (M416) . . . . . . . . .
Brakeshoe Adjustment (M416A1) . . . . . . .
Brakeshoe Replacement (M416) . . . . . . . .
Brakeshoe Replacement (M416A1) . . . . . .
Handbrake Cable Assembly Replacement
Handbrake Lever Replacement . . . . . . . . .
Hydraulic Brake Lines, Hoses, and Fittings Replacement (M416A1) . . . . . . . . . . . . . . . . . . . . . . . . .
Master Cylinder Replacement (M416A1)
Wheel Cylinder Replacement (M416A1)
4-26. HANDBRAKE LEVER REPLACEMENT.
This Task Covers:
Removal
Installation
a.
b.
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
One cotter pin
General mechanic's tool kit
q
q Two locknuts
Floor jack
q
q Two Iockwashers
WARNING
If trailer is not coupled to towing vehicle, ensure that wheels are securely chocked.
Failure to do so may cause trailer to roll, resulting in injury to personnelor damage
to equipment.
Remove cotter pin (12), flatwasher (n), and pin (3) and disconnect clevis (2) from handbrake lever (1).
1.
Discard cotter pin.
Remove 2 nuts (7), Iockwashers (6), and screws (10) securing handbrake lever (1) to bracket (4) .
2.
Remove handbrake lever. Discard Iockwashers.
Remove 2 locknuts (5) and U-bolt (9) securing bracket (4) to crossmember (8), Remove bracket.
3.
Discard locknuts.
4-32