TM 9-2330-251-14&P
4-39. CHANNEL REPLACEMENT (Con't).
NOTE
On right side only, handbrake lever and mounting bracket are installed when U-bolt
(9) is installed.
2.
Loosely install channel (8) to front crossmember (1) with U-bolt (9) and 2 new locknuts (2).
Loosely install channel (8) to chassis bracket (4) with 2 screws (3), new Iockwashers (6), and nuts (7).
3.
Tighten 2 locknuts (2) to 40 Ib.-ft. (54 Nm). Tighten 2 nuts (7) to 75 Ib.-ft. (102 Nm).
4.
FOLLOW-ON TASKS:
Install tube assembly (master cylinder to coupling) (M416A1 ) (para 4-34).
Install intervehicular cable (para 4-20).
Assemble drawbar coupler (M416) (para 4-41).
Install actuator with drawbar coupler (M416A1 ) (para 4-40).
TA503946
4-67
