TM 9-2330-251-14&P
Section XII. BODY MAINTENANCE
Page
Number
Paragraph Title
Cargo Body Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drain Valve Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fender Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-46. FENDER REPLACEMENT.
This Task Covers:
b.
Installation
Removal
a.
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
General mechanic's tool kit
Five Iockwashers
Personnel Required: Two
1.
Remove 2 nuts (7), Iockwashers (8), 4 flat-
washers (9), and 2 screws (11) securing fend-
er (1) to chassis (4). Discard Iockwashers.
While assistant supports fender (l), remove3
2.
nuts (6), Iockwashers (5), 6 flatwashers (2),
and 3 screws (3) securing fender (1) to body
(10). Remove fender. Discard lockwashers.
1.
With assistance, position fender (1) for installa-
tion.
2.
Loosely install fender (1) to body (10) with 3
screws (3), 6 flatwashers (2), 3 new
Iockwashers (5), and nuts (6).
Loosely install fender (1) to chassis (4) with 2
3.
screws (11), 4 flatwashers (9), 2 new
Iockwashers (8), and nuts (7).
4.
Fully tighten 3 nuts (6) and 2 nuts (7).
TA503962
4-85
