TM 9-2330-271-14&1
Figure 4-36. Removing rigid-type landing gear.
(2) Remove two nuts (1), lock washers (2) and
(5) Withdraw landing gear leg (4) toward :
cap screws (3) securing side brace (5) to chassis and leg
enter of van until crankshaft clears chassis and remove
assembly (4). Remove brace.
leg from under van.
c. Cleaning and Inspection.
(3) Remove two nuts (1), lock washers (2) and
cap screws (8) securing diagonal brace (9) to chassis
(1) Clean mud and dirt from all exposed
and leg assembly (4). Remove brace.
surfaces with water and a stiff brush.
(4) Remove nine cap screws (6) and lock
(2) Check operation of landing gear leg.
washers (7) securing landing gear leg mounting flange to
chassis.
4-53