TM 9-2330-271-14&P
APPENDIX B
COMPONENTS OF END ITEM AND BASIC ISSUE ITEM LIST
Section I. INTRODUCTION
This section is not applicable.
B-1. Scope
c. Part number. Indicates the primary number
used by the manufacturer which controls the design and
This appendix lists integral components of and basic
characteristics of the item by means of its engineering
issue items for the semitrailer, van: electronic, XM574,
drawings, specifications, standards,
and inspection
XM574E1, XM654, XM680, XM680E1, XM738, XM739,
requirements to identify an item or range of items.
XM739E1, XM822, XM823, XM824, XM844, XM845,
d. Description. Indicates the Federal item name
XM847, XM848, XM849, XM850, XM912, and XM913 to
and, if required, a minimum description to identity the
help you inventory items required for safe and efficient
item.
operation.
e. Location. The physical location of each item
B-2. General
listed is given in this column. The lists are designed to
inventory all items in one area of the major item before
This Components of End Item List is divided into the
moving on to an adjacent area.
following sections:
f. Usable on Code. "USABLE ON" codes are
a. Section II. Integral Components of the End Item.
included to help you identify which component items are
These items, when assembled, comprise the semitrailer
used on the different models. Identification of the codes
and must accompany it whenever it is transferred or
used in these lists are:
turned in. The illustrations will help you identify these
items.
Code
Used On
b. Section III. Basic Issue Items. These are the
A09
XM680
minimum essential items required to place the semitrailer
A10
XM654
in operation, to operate it, and to perform emergency
A11
XM738
repairs. Although shipped separately packed they must
A12
XM574
accompany the semitrailer during operation and
A13
XM574E1
whenever it is transferred between accountable officers.
A14
XM680E1
The illustrations will assist you with hard to identify items.
C13
XM822
This manual is your authority to requisition replacement
C14
XM844
BII, based on TOE/MTOE authorization of the end item.
C15
XM845
C16
XM847
B 3. Explanation of Columns
C17
XM848
C18
XM849
a. Illustration. This column is divided as follows:
C19
XM850
(1). Figure Number.
Indicates the figure
C58
XM824
number of the illustration on which the item is shown.
C59
XM823
(2). Item Number. The number used to identify
C61
XM912
item called out in the illustration.
C62
XM913
b. National Stock Number. Indicates the National
140
XM739
stock number assigned to the item and which will be
26F
XM739E1
used for requisitioning.
g. Quantity Required (Qty Reqd). This column lists
the quantity of each item required for a complete major
item.
h. Quantity. This column is left blank for use during
an inventory. Under the Rcv'd column, list the quantity
you actually receive on your major item. The Date
Columns are for your use when you inventory the major
item at a later date such as for shipment to another site.
Section II. INTEGRAL COMPONENTS OF END ITEM
This section is not applicable.
B-1
