TM 9-2330-285-14&P/TO 36A11-21-10-1
PREPARATION FOR USE - CONTINUED
Preparing Dolly Set For Transport Of A Shelter
1.
Apply parking brake (1) at rear trailer dolly.
CAUTION
Remove interdolly cable from stowed position to prevent pinching cable
between dolly frame and tool box when raising or lowering dolly.
NOTE
If dolly set is in the raised position, perform steps 2 thru 5. If dolly set is in the
lowered position, go to step 6.
2. Loosen wingnuts (2) on four strut clamps (3).
3. Place two hydraulic pump levers (4) in RAISE position
4.
Open four manual control valves (5) at hydraulic cylinders (6).
Change 1