TM 9-2330-285-14&P/TO 36A11-21-10-1
WHEEL CYLINDER
This task covers:
INITIAL SETUP
Tools
Equipment Condition
9/16-inch wrench
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
NOTE
This procedure is typical for all four brake assemblies.
Remove using a 9/16-inch wrench.
1 Backing plate (1)
Two screws (2) and
two washers (3)
2
Remove from backing plate (1).
Wheel cylinder (4)
Two links (5)
Pull out of wheel cylinder (4).
3 Wheel cylinder (4)
INSTALLATION
4 Backing plate (1)
Push into wheel cylinder (4).
Two links (5)
5
Position on backing plate (1).
Wheel cylinder (4)
6
Two screws (2) and
Secure wheel cylinder (4) using a 9/16-inch
wrench.
two washers (3)