TM 9-2330-285-14&P/TO 36A11-21-10-1
Section X HUB AND BRAKE DRUM MAINTENANCE
Page
4-132
Hub and Brake Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HUB AND BRAKE DRUM
This task covers:
d. Hub and brake drum installation
a. Hub and brake drum removal (page 4-132)
b. Wheel bearing removal (page 4-134)
e. Wheel bearing adjustment (page 4-136)
c. Wheel bearing installation (page 4-134)
INITIAL SETUP
Materials/Parts - Continued
Tools
New inner bearing cone
Hammer
New outer bearing cone
Drift
Wheel bearing socket
Equipment Condition
Socket wrench, ratchet handle, 1/2-inch
drive
Wheel and tire removed (page 3-6).
9/16-inch by 1/2-inch drive socket
Air removed from brake system.
Materials/Parts
References
New axle cover gasket
New grease retainer
TM 9-214, Care and Maintenance
ACTION
REMARKS
ITEM
LOCATION
HUB AND BRAKE DRUM REMOVAL
Take off using a 9/16-inch socket wrench.
1 Hub and brake
Six screws (2) and
drum (1)
six washers (3)
Take off.
Hub cover (4)
2
Discard gasket (5).
and gasket (5)
Using a hammer and drift, bend back lock-
Lockwasher (6)
3
washer to release locknut (7).
Take off using a wheel bearing socket.
Locknut (7)
4 Spindle (8)
Take off.
Lockwasher (6)
5
